Title: The component approach - From the harmonization process as a background to the perception of benefits and costs as effects.Authors: Elin Börjesson & Emma KarlssonTutor: Titti EliassonKey concept: Harmonization, Component approach and Benefit/CostBackground: With IFRS for SME's as a basis, the Accounting Board developed K3 which shall apply from financial year 2014. Upon introduction of the K3 companies will be forced to apply the component approach. When K3 with the associated component approach went out for consultation it resulted in a debate where some actors opposed the imposition of a requirement and not an option. It was questioned whether the costs with the component approach would be greater than the benefit of the implementation.Formulation of the problem: How is the introduction and use of the component approach seen by different operators from a benefit-, cost perspective?Aim: The aim of this essay is find out how the introduction and use of the component approach is seen by different operators from a benefit-, cost perspective.

AbstractBuilding Information Model/Modeling/Management (BIM) is a tool that allows for efficient working methods. BIM saves time and money while providing the potential for visualization. This method of working is based on a 3D-model, and then a fourth and fifth dimension are connected. 5D modeling means that a spreadsheet creates cost estimates based on the 3D model. This provides opportunities to carry out calculations in the early stages of the projects. Calculations are currently performed manually and do not contribute to the development that the construction industry requires.

Due to the forest industry downsizing, many communities in rural forest regions in Canada and Sweden are facing problems to survive. In order to create community sustainability, resilience and well-being in remote forest regions, the view on the forest resources has shifted towards multiple use, through the concept of sustainable forest management (SFM). Beside the economic and ecological elements of sustainability, the social forest values are needed, contributing to the human well-being, local participation, stakeholder collaboration, human rights and cultural connection. In this thesis the embodiment of the social component of SFM within Prince Albert Model Forest (Canada), and Vilhelmina Model Forest (Sweden) will be examined. Being partners and facing similar challenges as rural boreal forest regions, the two model forests are compared through analysis of projects and activities, conducted interviews and organization documents. Looking at projects mentioned as successful by the interviewees, they all have elements from the social values of SFM. The direction can be explained by the introduction of the Forest Communities Program in Canada, demanding the Model Forests to work towards community stability and resilience, the Model Forest organization concept itself and the way global focus are increasing around social forest values. In the future, it may be important that the role of the MFs enable some kind of political authorization and legitimacy in order to improve conflict solving and indigenous rights equality.

In this work, a method was developed and evaluated for calculating the life of welds under the influence of fatigue loads from a vibration environment. Typically, a shaker table is used for testing a component against vibration loads. The shaker table creates a vibration environment that is defined in the frequency domain by a power spectrum.Similarly, a virtual vibration table can be used to calculate the same type of load environment, which can then be used to calculate the expected lifetime. The benefit of this method is that it can be used in design, as well as in simulation of tests before physical verification tests are carried out.Today there are methods for calculating fatigue life of non-welded base material, but since many components contain welded joints, there is a need to apply this method to those types as well. To achieve this, the thesis combines two different areas, which together provide a method for fatigue assessment of welds using a virtual shaker table.The methodology is carried out by modeling the component, and its welded joints, in a finite element program.

A current conveyor is an active building block that can be used to implement most active and passive components. It differs from the operation amplifier in that it uses current instead of voltage. The current conveyor also has significantly higher voltage gain over a broader frequency range. To simplify the construction of analogue circuits and increase the construction efficiency it is desirable to use a top-down methodology. This means that the whole system is partitioned into a hierarchy of subsystems.

The ability to fight is, according to Swedish Armed Forces Doctrine (MilitärstrategiskDoktrin), depending upon the physical component, the conceptual component and themoral component.The purpose of this thesis is to examine in what way the Swedish doctrine is based onthe theories on war and war fighting by Sun Zi, Carl von Clausewitz, Antoine Henri deJomini and Mao Tse-tung.I have found that the Swedish doctrine is based on those theories.However, the Swedish doctrine needs to be developed in order to better explain therelation between the three components..

Research where personality in animals is studied is becoming more and more common. In this area there are different concepts like behavioural syndrome and animal personality and they usually talk about consistency in behaviour over time and situations. This consistent individual behaviour can be used as an indicator of how individuals can handle and adjust to new situations in the environment. Because of this, personality studies in animals are very important in animal welfare. In this study personality in dairy cattle in lose housing were studied.

This thesis presents the theory behind prototyping and user interviews as parts of requirements analysis. It further discusses how these were used in the development of a budget planning application. The implemented Web-based solution uses a new component-based design rooted in a Model-View-Controller architecture. The application is used today with complete success at the Department of Computer and Information Science at Linköping University..

The impact of computer programs in safety-critical systems has increased in the past decades and computer-based systems can now be found in a wide range of applications. A new approach for developing dependable systems is documenting all design rationale that affects safety using Intent Specifications. A recent approach for developing complex systems efficiently and in an upgradeable manner is Component-Based System Engineering. In this thesis, these approaches are combined in the development and upgrade of a Remote Robot Control Unit by using the tool SpecTRM. The case study showed that Intent Specifications and CBSE could successfully be combined.

This thesis deals with the compatibility between analysis software Revit Structure2012 and Robot Structural Analysis 2012. The purpose is to become more aware ofinformation management models to be compatible across different softwareapplications. The structural model is made to be optimal for the compatibility of othersoftware Aim is also to gain an understanding of the transferring methods that exist,and which method is most convenient to use and to examine whether the methodswork in practice. Objective of this project is to make the modeling processtime-efficient for constructors. Models do not need to be structured in severaloccasions in different software; it only needs an optimal model that transfers properlybetween software.The method used in the thesis consist cases where the transferring process isexamined.

Normally the operational amplifier is used as a component in active filter design. The goal for future components in filter design is large bandwith and the use of low supply voltages. The use of current-mode instead of voltage-mode circuits gets a step closer to the required performance. A component that use current as the signal conveying part is the current conveyor. In this report a comparative study between two current conveyor structures of second generation (CCII) is performed.

This thesis work has been performed at the department of diagnosis and dependability at Volvo Car Company, Torslanda. The background of this project is based on interest in ascertaining how different factors possibly can affect a diagnosis method, which has been developed to find leaks in the fuel tank and evaporation system. According to the OBD II requirements leaks with an orifice diameter larger or equal to 0,5 mm, must be detected. The idea of the diagnosis method is to create an over pressure in the system with an air-pump. The current through the pump is measured and correlates to the power consumed by the pump.

Due to increasing regulations regarding new diesel vehicles particulate matteremissions the new Scania truck, Scania Euro 6, has been equipped with a particulatefilter. This component effectively stores the particles in the exhaust gas but must becleaned in order to prevent itself from clogging. The filter is cleaned through aprocess named regeneration which is a thermodynamic process in which thetemperature of the filter is raised through fuel supplied to the exhaust gas.The purpose of this thesis is to contribute to the development of improved controlstrategies of the temperature during the regeneration process through thedevelopment of model-based controllers. These controllers are designed in order tohave good performance in stationary as well as automatic regeneration.In order to develop these model-based controllers a model of the system isconstructed. The model is described as a linear thermodynamic grey-box model withflow varying parameters, showing good results in validation.The model provides a simulation environment during the controller design, which isfocused around the development of linear regulators with the exhaust gas mass flowas a scheduling variable whose size determines controllers? mode of operation.

The increasing complexity in the development of a configurable real-time system has emerged new principles of software techniques, such as aspect-oriented software development and component-based software development. These techniques allow encapsulation of the system's crosscutting concerns and increase the modularity of the software. The properties of a component that influences the systems performance or semantics are specified separately in entities called aspects, while basic functionality of the property still remains in the component. When building a real-time system, different sets of configurations of aspects and components can be combined, resulting in different configurations of the system. The temporal behavior of the system changes and a way to ensure the predictability of the system is needed.

To introduce a standardized component assortment takes a lot of effort in order to make real cost savings. The rationalization effect itself is important, but perhaps even more important is to state the aim of the standardization efforts in a well-defined way. How can an organization assure that they are working in a proper way? How do they know that their efforts are being interpreted into the whole organization? And, how do they know that the standardization efforts actually save money? Different components differ heavily e.g. in technical complexity and quality issues.